Task Discussion

trycatchblock said:

https://github.com/p2pu-intro-ruby/coursework

&

https://github.com/dublinan/coursework

leads to a 404. What happened here?

on May 18, 2013, 12:57 p.m.

sad_tigger said:

Try https://github.com/SadTigger/coursework or https://github.com/davidodowd/coursework .

on May 18, 2013, 2:15 p.m. in reply to trycatchblock

Andre Dublin said:

sorry about that I updated the link

on May 19, 2013, 10:45 p.m. in reply to trycatchblock
__hsams__ said:

Installed on Fedora 18, from the repos, because I'm lazy.

on Jan. 25, 2013, 6:12 p.m.
Jure said:

Installed Windows gitHub

on Oct. 29, 2012, 8:13 a.m.
David O'Dowd said:

I'm hoping I have done this all correctly. https://github.com/davidodowd/coursework

on Sept. 29, 2012, 10:05 p.m.

Andre Dublin said:

Right on track David

on Sept. 29, 2012, 10:33 p.m. in reply to David O'Dowd

David O'Dowd said:

Thanks Andre. It might be worth adding steps about what http://windows.github.com/ does. Should people be using it or should they be learning by using the commands.

on Sept. 30, 2012, 7:21 a.m. in reply to Andre Dublin

Andre Dublin said:

I'd like the course to introduce people to the command line, since ruby and rails both use it heavily. Also being comfortable in the command line gives people confidence in other areas of software development.

Thanks, I'll add it to the course materials.

on Sept. 30, 2012, 8:15 p.m. in reply to David O'Dowd
RobRoy said:

I found dublinan/coursework repository empty. I don't get it.

on Sept. 10, 2012, 6:38 p.m.

Andre Dublin said:

What do you need assistance with?

on Sept. 11, 2012, 7:13 a.m. in reply to RobRoy

Georgiy Slobodenyuk said:

It should only have a README file. It is meant to be copied and modified.

on Sept. 11, 2012, 12:47 p.m. in reply to RobRoy

RobRoy said:

OK. I thought I find in the repository partly prepared exercises. Now I understand, I need to write them and then put into repository.

on Sept. 11, 2012, 12:58 p.m. in reply to Georgiy Slobodenyuk
Shubham said:

M done..

https://github.com/shubhamVerma/coursework

on Aug. 19, 2012, 1:21 a.m.

narendhar said:

congrats..

on Aug. 19, 2012, 2:56 a.m. in reply to Shubham

Andre Dublin said:

Excellent

on Aug. 19, 2012, 8:40 p.m. in reply to Shubham
narendhar said:

Created my git account

https://github.com/narendahr15/Spoon-Knife

on Aug. 17, 2012, 9:40 a.m.

Andre Dublin said:

Looks good, if your using your own repo for the course that is fine

on Aug. 17, 2012, 9:42 a.m. in reply to narendhar

narendhar said:

Hai,

I am a novice in this field.What is use of these repo in ruby?

on Aug. 17, 2012, 10:16 a.m. in reply to Andre Dublin

Andre Dublin said:

I'm just having you all as students understand some basic git commands with this challenge, and understand basic parts of github.

The use of github repos will allow me to read over your work and provide help where needed. If that answers your question.

on Aug. 17, 2012, 10:23 a.m. in reply to narendhar
Frank Murphy said:

Ok, getting some time fianlly.

Git account setup.

One error on:

git remote add upstream git://github.com/octocat/LearnRuby.git

git fetch upstream

fatal: The remote end hung up unexpectedly

on April 1, 2012, 7:03 a.m.

Andre Dublin said:

can you provide a link to your git account

on April 1, 2012, 9:42 a.m. in reply to Frank Murphy

Frank Murphy said:

https://Frankly3D@github.com/Frankly3D/LearnRuby.git

git://github.com/Frankly3D/LearnRuby.git

on April 1, 2012, 9:54 a.m. in reply to Andre Dublin
Andre Dublin said:
Ok, here is how you will copy your repo localy

$ git clone git@github.com:Frankly3D/LearnRuby.git

You won't have to set up a remote because cloning, automatically creates it. Then all you have to do is follow this workflow

$ git add <fllename>

or

$ git add .

. is all files that have been changed/added to the repo

$ git commit -m "your message here" $ git push origin master

You won't have to worry about using upstream, upstream is used when say your working from two different machines, or you have collaboraters on a project and there are changes to the remote repo git fetch upstream will pull in those changes for you without merging.
on April 1, 2012, 11:16 a.m. in reply to Frank Murphy
Anonym said:

All steps went ok, git account is set up. I followed the github page tutorial. (mac lion)

on March 12, 2012, 12:52 a.m.
Peter Hwang said:

I'm having some problems cloning. See below. Any ideas on what I'm doing wrong?

Peters-MacBook-Air:~ hwangpet$ git clone git@github.com:hwangpet/coursework.git
Cloning into 'coursework'...
error: cannot run ssh: No such file or directory
fatal: unable to fork

on March 11, 2012, 1:35 p.m.

Rhodee said:

The error seems to be telling you that github can't find your public keys:

So try this: http://help.github.com/mac-set-up-git/

If this is the only identity you have (i.e. only one github account) you can simply follow along. If you have something more involved we might need to talk about your ssh setup.

Shoot a message when you have worked through those steps (you only have to do it once)...unless this happens again.

Denis

on March 11, 2012, 2:14 p.m. in reply to Peter Hwang

Peter Hwang said:

Thanks. Now I'm stuck on step 3.

Peters-MacBook-Air:.ssh hwangpet$ ssh-keygen -t rsa -C "hwangpet@gmail.com"
-bash: ssh-keygen: command not found

on March 11, 2012, 5:16 p.m. in reply to Rhodee

Andre Dublin said:

Did you run this command at your prompt?

ssh-keygen -t rsa -C "your_email@youremail.com"

Just want to make sure your didn't put any extra words/characters in there

Also it seems your running Lion OS X

run echo $PATH in terminal and let me know the response.

on March 11, 2012, 6:02 p.m. in reply to Peter Hwang

Peter Hwang said:

Andre,

Thanks for reply. See below:

Peters-MacBook-Air:.ssh hwangpet$ ssh-keygen -t rsa -C "hwangpet@gmail.com"
-bash: ssh-keygen: command not found

Peters-MacBook-Air:.ssh hwangpet$ echo $PATH
/usr/local/git/bin:/bin:/usr/local/bin:/bin:/usr/local/bin

on March 11, 2012, 6:11 p.m. in reply to Andre Dublin

Andre Dublin said:

I think that you may have to install Xcode to obtain developer tools such as ssh. Or you can roll your own and install openssh. However I recommend install Xcode.

on March 11, 2012, 7:35 p.m. in reply to Peter Hwang

Peter Hwang said:

Installed xcode - still get the same errors. Any other ideas?

on March 11, 2012, 8:41 p.m. in reply to Andre Dublin

Rhodee said:

Hi Peter,

Did you install xCode 4? I am not a Mac user, but this thread seems to be relevant: http://stackoverflow.com/questions/5364340/does-xcode-4-install-git.

Perhaps since xCode appears to install git it simply can't find the path you can tell it to like this post suggest: http://stackoverflow.com/questions/5545715/how-do-i-add-usr-local-git-bin-to-the-path-on-mac-osx

Keep plugging away man!

on March 11, 2012, 9:14 p.m. in reply to Peter Hwang

Anonym said:

Peter, check it: http://bit.ly/zyDoRQ It may help with the ssh problem

on March 12, 2012, 12:54 a.m. in reply to Peter Hwang

Andre Dublin said:

Hey Peter,

Can you echo your $PATH again now that Xcode is installed?

I'm hunting an answer for you.

on March 12, 2012, 12:22 p.m. in reply to Peter Hwang

Peter Hwang said:

Andre,

Here the result after running echo $PATH in terminal:

wifi-dhcp-55-168:~ hwangpet$ echo $PATH
/usr/local/git/bin

Thanks again for all the help fellas! I'm going to work with one of my developers today who already use github so hopefully they can point me in the right direction.

on March 12, 2012, 12:32 p.m. in reply to Andre Dublin

Andre Dublin said:

It looks like your missing some necessary binarys in your PATH variable

these basic path settings should be in your .bash_profile like so

export PATH=/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin:$PATH

Not sure where your Xcode is, but your developers should understand the situation

on March 12, 2012, 12:44 p.m. in reply to Peter Hwang

Peter Hwang said:

Andre - you were correct. My .bash_profile was corrupted. My echo $PATH looks normal now:

wifi-dhcp-55-168:Users hwangpet$ echo $PATH
/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin:/usr/local/git/bin:/usr/local/git/bin

Thanks alot everyone!

on March 12, 2012, 2:29 p.m. in reply to Andre Dublin

Andre Dublin said:

Excellent

on March 12, 2012, 2:50 p.m. in reply to Peter Hwang
Andre Dublin said:

I think you might be right about requiring git before you install rvm, but i believe you usually use curl to install...

on March 9, 2012, 10:25 p.m.
Mark Finlay said:

This one is a bit tricky with all the diferent steps between installing git, setting up the account and the ssh keys so that the installed Git on your machine can talk to your Github account.

From what I can remember, to install RVM it also requires you to have Git installed on your machine for some reason. This might help poeple having trouble installing RVM.

on March 9, 2012, 7:43 p.m.

Mark Finlay said:

Hey guys,

I'm glad Peter is up and running. I remember having allot of the same issues trying to the different bits a pieces put together myself. I see that Peter has in his bash_profile:

/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin:/usr/local/git/bin:/usr/local/git/bin

I was wondering how does this actaully work? My understanding so far is that when you call a program to perform an action in the command line, for example "rails server", "mysql -u root" or "git init", the comand line looks for the named program in the directories mentioned in the bash_profile file. Am I right? Could someone clarify?

Again, another aussumption is that, for programs to talk to each other on a host they need to know where each other exist on the hard disk. If I have a rails app that needs to resize an image, how does the rails app know where ImageMagick is? Do the diferent applications use the bash_profile as a directory to find each other?

Also, How does the syntax of the bash_profile files or shell script work interms of tying libraries and applications together?

Where does RubyGems and Bundler fit into this whole thing?

Obviously this kind of stuff plays an important part in your development enviornment but it's plays a massive role in delievering code. Interms of depoying ruby applications to the web it's important to have a solid handle on how to setup Linux boxes. It would be great to get pointers to goood resourses on more learning for this kind of stuff.

on March 16, 2012, 8:18 p.m. in reply to Mark Finlay

Andre Dublin said:

Hey Mark, excellent question!

The string you see when you use echo $PATH in terminal is a result of a UNIX variable. It tells terminal where to find the binarys necessary to execute programs the " : " is a delimiter that lets you specify multiple paths to where your binaries are located in the file system.

How Ruby knows where to find stuff because when ruby is built for your particular machine, it has predefined directories to hold libraries. Where these reside all depends on the machine you are using. So an Ubuntu OS Ruby location may be different from a Windows OS Ruby location, or when you install RVM the Ruby location is different and so on.

If you run this command in terminal

ruby -e 'puts $:'

You will receive an output of the directories that Ruby is using.

$: is a Ruby array variable of places to search for loaded files.

As for Rubygems, it is a standardized packging and installation framework for Ruby libraries and apps. Thus making it easier to install, upgrade, and locate Ruby packages. Keeping lots of Ruby developers including myself sane.

Rubygems handles all the dependencies, and version control of gems to install on your system.

Bundler is sort of an extension for Rubygems in Ruby applications, using Gemfiles to install and locate gems necessary for your application.

I hope this answers your question, here are some links below to help you further understand.

The PATH Variable in UNIX

Bundler

Rubygems

on March 16, 2012, 10:37 p.m. in reply to Mark Finlay